SoCal Jet Boats

Tech Talk => Engine Mechanical / Electrical => Topic started by: el mojado on June 09, 2014, 12:19:47 AM

Title: 4 point mount question
Post by: el mojado on June 09, 2014, 12:19:47 AM

I have a Glenwood 4 point mount set up that I want to use. The boat previously had a 3 point set up. My issue is that I cant install the lower bolts for the feet into the stringer because of my floor. Will I be okay with just one bolt going through the stringers at each corner?

Sent from my SCH-I535 using SoCalJetBoats mobile app

Title: Re: 4 point mount question
Post by: el mojado on June 09, 2014, 07:19:49 AM

The floor is way up that I can only fit the top bolts.

Sent from my SCH-I535 using SoCalJetBoats mobile app