SoCal Jet Boats
Tech Talk => Engine Mechanical / Electrical => Topic started by: albertflores66 on August 17, 2015, 10:37:58 AM
-
Anyone know where they sell pulley kits that fit glenwood motor mounts?
-
Anyone know where they sell pulley kits that fit glenwood motor mounts?
I use a stock GM 10si alternator with pulley, and an early short water pump single sheave crank pulley...off the shelf at o'rielys.
Dan'l
-
im still a little lost. looking to fit a 4 Point Motor Mounts (Glenwood)
-
something similar to this.
-
something similar to this.
-
im still a little lost. looking to fit a 4 Point Motor Mounts (Glenwood)
So, which engine?
On a big block chevy, use the glenwood alternator mounting point, lower left
Here, on front mount alt. mount :http://www.arsmarine.com/Engine_Parts.htm
Early SBC single groove pulley : http://www.summitracing.com/parts/sum-g3952 (http://www.summitracing.com/parts/sum-g3952) (same bolt pattern)
If its an olds or a ford, I dont know.
Dan'l
-
It's a small block Chevy 358
Sent from my iPhone using SoCal Jet Boats
-
It's a small block Chevy 358
Sent from my iPhone using SoCal Jet Boats
A billet aluminum single groove pulley for the crank
and a chrome alt. pulley
Dan'l
-
Thanks dan!
Sent from my iPhone using SoCal Jet Boats