SoCal Jet Boats
Tech Talk => Engine Mechanical / Electrical => Topic started by: crusader1983 on February 25, 2010, 12:40:33 AM
-
Hi guys I was hoping that you guys can help me out I have a set of bare 049 bbc chevy heads that I need assembled I have all the hardware minus valve guides and need some help getting them assembled any ideas?
-
You don't have valve guides or push rod guide plates? The valve guides are not replaceable, they can be knurled or guide liners can be installed, but both need to be done by a machine shop.
Why are they apart?
Have they been tested for cracks?
Have you had the valves/seats done?
The safest thing to do would be to have Dave at A&D check and assemble them.
-
The valve guides are not replaceable, they can be knurled or guide liners can be installed
Are you sure crew? I did a set of 781's I know they are knurled and you can have liners. But I thought that they could be pressed out and new ones could be installed. The 781 and 049 are almost identicle.
Maybe I'm wrong, maybe mine were just lined!
But I agree with crew, def. have them checked first.
BBC valve guides ARE REPLACEABLE ! but........
1. They are tapered and can only be removed and installed one way...or you will crack the heads.
2. The guides block the water jackets , so with that being said....I PREFER using guide liners so that you do not disturb
the factory guide and possibly have a water problem.
3. IMO the factory guide should only be replaced as a last resort.
--------hope this helps------- ;D FORGOT TO ADD...YOU CAN MACHINE GUIDES FOR OVERSIZE VALVE STEMS :sly:
-
Thanks Dave...
I knew that they could be removed, but have always been told to not replace them.
Good info :thumbup:
-
Your welcome Crew22 ;D