SoCal Jet Boats

Tech Talk => Gelcoat / Paint / Fireberglass Repair => Topic started by: Antdogg714 on December 14, 2013, 08:20:41 PM

Title: Rub Rail
Post by: Antdogg714 on December 14, 2013, 08:20:41 PM

Heys guys it been a awhile since i been on. I keep having to rivet back my rub mail and it keeps popping off. What is the best way to keep it high in tight, should i use silicone in the holes before i rivet it back.

Title: Re: Rub Rail
Post by: Antdogg714 on December 15, 2013, 03:02:41 PM

Whats up Kaotyk, man thats alot work. Any recommendation on filler and resin, will the syringe type resin and filler mixture work. i know its a stupid question.

Title: Re: Rub Rail
Post by: jyeager on December 15, 2013, 03:23:03 PM

Quote from: Antdogg714 on December 15, 2013, 03:02:41 PM

Whats up Kaotyk, man thats alot work. Any recommendation on filler and resin, will the syringe type resin and filler mixture work. i know its a stupid question.

I would use a mix resin with cabosil till it's a penutbutter ,then fill all the holes with that. Easy and wouldn't take more than 30 minutes.


Sent from my iPhone using SoCalJetBoats mobile app

Title: Re: Rub Rail
Post by: tunnels on December 28, 2013, 03:00:18 PM

If you have the room and a helper you can have them hold a stainless washer in place on the inside of the hull while you rivet it.