SoCal Jet Boats
Tech Talk => Gelcoat / Paint / Fireberglass Repair => Topic started by: 2Screwed on August 24, 2010, 04:01:55 PM
-
I would like to paint my boat and was wondering if anyone lives in the San Diego (North County) area has done this before. I do NOT want to take it to a shop. I think the experience of doing it myself and learning will be fun. I have a large garage, spray gun, compressor, etc, just need someone with knowledge of boat painting to guide me a little. I'll provide beer and pizza.
Also, where is the best place to buy paint?
K
-
Just bought some paint. I got kopper kandy urethane base coat, some reducer and clear from kustom paint in san Diego. I hope this works out. Not planning a full on paint job. Just scuff, clean and shoot over the original paint. It is still good, just a little faded and I want to freshen it up a bit.
-
You sure you want to do that ??? ??? What about wet sanding and a good wax job ??? Lotta rides come back that way, a little elbow grease is all it takes, especially if ya say it's just a little bit faded :sly:
-
with 76 nordic you will have to wet sand and wheel the paint anyway's unless you want a new look few guy's said not to paint the bottom bc/cc and do a single stage on the bottom and can do bc/cc on top good luck. i live to far away to help or i would be there for you to help out
-
I want to repaint my boat as well, I live in Ramona, But I want to fix the fiberglass first theres some cracks on bottom and top or thinnen layers on bottom, then i want to paint it, but i wonder if gel coat is different than automobile painting?
-
I tried to buff out the paint and wax it first, however there is some old school glitter mixed in with it. The glitter appears to be silver and the paint an orange color. When I buff it the color does not come back in the areas where it is faded. If anything it gets more silver.
I have not started yet but would like to start this weekend. My plan is to remove all hardware from the hull, take out the seats, wash it, scuff the hull with scotch brite grey, wash it, de-grease, apply the prep spray, paint 2-3 coats of the Kopper Kandy that I got (I'll have to see how it looks), spray the clear, wet sand, buff, wax, reinstall everything I took off.
I'm hopeful it will go well but not overly concerned if it doesn't. It's just a paint job and can be redone.
-
Don't know about spraying, it would be fun to learn. I just did the bow with 1 stage white with a foam roller.
-
I don't have much additional knowledge, but I will work for free beer! I'm in Vista too. PM me if you want any help.
Steve
-
just finished an extensive paint job on mine 33 coats see my new project in boat showcase .If I can be of any help just ask
-
wish i woulda saw this sooner, but in escondido sherwin williams on quince sells automotive paint and suppplies. tell them youre a palomar college student and should get a discount