SoCal Jet Boats

Tech Talk => Gelcoat / Paint / Fireberglass Repair => Topic started by: el mojado on June 19, 2013, 01:34:27 PM

Title: Stringer/floor replacing question
Post by: el mojado on June 19, 2013, 01:34:27 PM

I have read that when I replace the floor and stringer that the boat shoukd not be on trailer. What is the best way to support it? Its a mini day cruiser. It has engine stringers. The one long stringer down the middle

Sent from my SCH-I535 using SoCalJetBoats mobile app

Title: Re: Stringer/floor replacing question
Post by: el mojado on June 22, 2013, 02:42:06 PM

Any pointers? Links to other threads? Thanks

Sent from my SCH-I535 using SoCalJetBoats mobile app

Title: Re: Stringer/floor replacing question
Post by: jyeager on June 22, 2013, 02:56:30 PM

yes. you shouldn't leave it on the trailer. the best thing to do is build a dolly. Check out this on Performance boats. his build has it all! http://www.performanceboats.com/jet-boats/10678-73-kona-resto-build-ii.html (http://www.performanceboats.com/jet-boats/10678-73-kona-resto-build-ii.html)