SoCal Jet Boats

Tech Talk => Hulls => Topic started by: Tancilitis on March 10, 2011, 05:17:45 PM

Title: Thru Transom Exhaust TIps
Post by: Tancilitis on March 10, 2011, 05:17:45 PM

What do you guys recommend or have used to seal the exhaust tips on the fiberglass side of the boat?  Got some new polished tips but need to seal them better.

thanks

-joe

Title: Re: Thru Transom Exhaust TIps
Post by: lupo1904 on March 10, 2011, 05:41:23 PM

high temp cilicon

Title: Re: Thru Transom Exhaust TIps
Post by: Your Mom on March 10, 2011, 05:52:06 PM

Quote from: Tancilitis on March 10, 2011, 05:17:45 PM

What do you guys recommend or have used to seal the exhaust tips on the fiberglass side of the boat?  Got some new polished tips but need to seal them better.

thanks

-joe

If they are like these...I used clear marine silicone. No need for high temp. They are always in the water and water is always on its way out....Put a nice bead around the tube to flange area.
Make sure you get some around the bolts and snug it up...wait for a few then tighten up. (https://forum.socaljetboats.com/proxy.php?request=http%3A%2F%2Fimg43.imageshack.us%2Fimg43%2F7863%2Fnewexhaust.jpg&hash=09cb8c3a2cba1726aa9414f7ca6bf01df4b113fd) (http://img43.imageshack.us/i/newexhaust.jpg/)

Title: Re: Thru Transom Exhaust TIps
Post by: Your Mom on March 10, 2011, 05:57:14 PM

Soon as you get it back on the trailer, spray some clear vinegar on them...keeps em looking polished new.

Title: Re: Thru Transom Exhaust TIps
Post by: Tancilitis on March 11, 2011, 01:52:19 PM

Awesome, thanks guys.  Im about to finish em up right now....

-joe