SoCal Jet Boats

Tech Talk => Interior => Topic started by: Kyle700 on December 14, 2012, 05:01:34 PM

Title: Floor suggestions needed
Post by: Kyle700 on December 14, 2012, 05:01:34 PM

I replaced the entire floor, sealed it with resin. I used the one-part epoxy paint on top of that, but over 6 months, it has cracked all over the place. 2-6 inch cracks. I want to take all that paint off and redo it. Any other ideas...maybe the two-part (Rustoleum) epoxy paint?

Title: Re: Floor suggestions needed
Post by: 82daytona on December 15, 2012, 03:48:48 AM

Flow coat it fo sho! I did mine it was a lot of work! But looks awesome

Title: Floor suggestions needed
Post by: 82daytona on December 15, 2012, 03:51:16 AM

Kinda wish I would have done blue but here it is

Title: Re: Floor suggestions needed
Post by: Kyle700 on December 23, 2012, 10:14:38 AM

Is flowcoating a one step paint-like process or is the the second of a 2-part process. A little confused, reading about it, what I take from it is that it is a topcoat on gelcoat.?? Will it go directly onto resin?  I' cornfused :/

Title: Re: Floor suggestions needed
Post by: Kyle700 on December 23, 2012, 02:08:25 PM

Can it be applied directly to a unfinished/sanded wood floor?

Title: Re: Re: Floor suggestions needed
Post by: BIG JOHNSON on December 24, 2012, 10:10:40 AM

Quote from: Kyle700 on December 23, 2012, 02:08:25 PM

Can it be applied directly to a unfinished/sanded wood floor?

I haven't used the stuff but I don't see why not as long as there's no way water can get to the wood afterward and cause cracks by swelling 

Sent from DROID RAZR MAXX HD