SoCal Jet Boats

Tech Talk => Jet Pumps => Topic started by: 74rogers on June 01, 2011, 06:05:18 PM

Title: water hose hook up
Post by: 74rogers on June 01, 2011, 06:05:18 PM

I would like to run my boat so I can trouble shoot some probelms but I want to make sure Iam not going to cause any more problems to my boat,  in the picture below  is that the correct spot to hook up the hose and if so whats the process of starting the engine. My next question is do I need to run another hose to the pump and whats the process. One more question, how long will I be able to run my engine when Iam doing this whole process. I really appricate every ones help      [attach=1][attachimg=1]

Title: Re: water hose hook up
Post by: Nixonnow on June 01, 2011, 06:30:46 PM

Quote from: ka0tyk on June 01, 2011, 06:20:31 PM

 hook your hose up but do not turn it on full blast..

wanted to add what kaotyk said....start the motor before you turn on your water hose.

Title: water hose hook up
Post by: lbhsbz on June 01, 2011, 07:47:40 PM

Don't bother.  The issue is that the impeller isn't loaded so neither is the thrust bearing.  Unloaded, the thrust bearing allows quite a bit of radial slop.  Disconnect the driveline or take a trip to a local lake.

Title: Re: water hose hook up
Post by: N2GLOCK on June 02, 2011, 03:52:09 PM

I'll email you a pic of my garden hose hook up. Also, here is some info from Brekeley on running a jet out of the water. http://www.berkeleyjet.com/t-bj_tech.aspx (http://www.berkeleyjet.com/t-bj_tech.aspx)

Title: Re: water hose hook up
Post by: 74rogers on June 02, 2011, 04:23:58 PM

I really appriciate all the good info and any other tips will be great as well. Pictures will surely help me out you can email me at sgtgt1977@yahoo.com thanks