SoCal Jet Boats
Tech Talk => Outboards => Topic started by: MEGAMIND on April 10, 2017, 08:54:14 AM
-
Hi guys in new to the hole boat life. That being said I got a project boat at the end of last summer and replaced all the stringers and floor and some other miscellaneous stuff like the tachometer and gages. The new one has some settings on it and in trying to get it programed right. Does anyone know the idle RMP for an 88 blackmax 200?
thanks
-
I believe 5-800 is where you want to be but I've always been told to adjust the idle by changing the timing
Sent from my iPhone using SoCal Jet Boats
-
Less than 750rpm. It won't shift right anything higher.
That tach should be set up for "poles". More motor info needed to be sure how it gets set up.
And Bunger is spot on. The timing determines idle speed. But thinking you needed to know to verify the tach?
GT
Sent from my SM-G900V using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Thank you
what motor info do you need to find out how many poles ?
-
Thank you
what motor info do you need to find out how many poles ?
What tach?
That motor should have a 12 pole alternator, you would set the tach for "6" poles, if there is an "Alt" switch, that should be "on".
Outboard tachometers don't work like automotive. You may need to purchase an adapter.
Hope this helps.
GT
Sent from my SM-G900V using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
thanks every bit of info I get helps .The gage is a Faria 35005 coral 7000 RPM for outboards. I will look gage to see if it has an alt switch
-
Nice float just went outboard myself. Have a 88 200 black max with a bad cylinder going to keep for parts probably if you ever need anything
Sent from my SM-G935V using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Thank you it was a long winter project. I will keep that in mind if I need anything.
What motor are you running on you boat?
-
Bought another boat that was crap bit had a 95 200 on it so did thr swap and junked the other boat. Those damn motors are hard to find
Sent from my SM-G935V using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Bought another boat that was crap bit had a 95 200 on it so did thr swap and junked the other boat. Those damn motors are hard to find
Sent from my SM-G935V using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
No more jet.🤔 went to the dark side huh. We'll I like my eggs scrambled so when we making a trip.
Sent from my iPhone using SoCal Jet Boats
-
Yes we did wanted a open bow outboard for thr room. Couldn't find one so the son talked me into this one. Not one of my best decisions but will work this year. Have to do elsinore trip soon. When your hotrod done?
Sent from my SM-G935V using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Yes we did wanted a open bow outboard for thr room. Couldn't find one so the son talked me into this one. Not one of my best decisions but will work this year. Have to do elsinore trip soon. When your hotrod done?
Sent from my SM-G935V using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
Sweet deal!! Yea deff need to make a trip or two. At this point idk I'll deff get in contact when I get it back together. Hopefully sooner then later. You could pull me around and I'll drink beer 😜👍🏻
Sent from my iPhone using SoCal Jet Boats
-
With the luck we been having might have to paddle
Sent from my SM-G935V using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
what prop are you running on that 200?
-
Right now all we have is aluminum 21p and a 21p 5 blade stainless
Sent from my SM-G935V using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
How does the 21p 5 blade work ? I have only tried a 21 3 blade aluminum
-
My kid took it out and said it pulled real hard topped out at 60. Have a 23 pitch stainless he tried but said it did 52 and slipped alot. Think its for a outdrive so have to try a different one for any more top end. Have you ran yours yet?
Sent from my SM-G935V using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Yes I ran the three blade 21 and it pulled OK and I got it up to 52. I am looking for something that will pull harder and get me up around 60 . Preferably something in aluminum because I plan on running it at the river . I have a 5 blade 19 that I was going to try next
-
Talked to s guy that runs a 23p 4 blade and luvs it theres a prop guy by me that Will let you try one out if he has one might give that a try and see if it works with this hull
Sent from my SM-G935V using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Nice I wish I had a guy up hear that will let me swap props out I was thinking of trying a 23 spitfire to try and get more top end out of her . What style of hull do you have
-
Its own a daytona sprint has the stoker or eliminator tunnel bottom
Sent from my SM-G935V using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)