SoCal Jet Boats
Tech Talk => Projects => Topic started by: Brad @ SCJB on October 09, 2019, 09:33:26 AM
-
This is the raffle boat build thread for the Horsepower Fest 2019 Grand Prize!
Horsepower Fest 2019 is benefiting the Semper Fi Fund, a program that helps wounded veterans of all branches of the US Military that have been wounded in post 9/11 battles. Last year Horsepower Fest raised and donated $10,000 to the Semper Fi Fund.
This is a 1979 Bahner Flat Deck. It was purchased as a complete boat minus motor. It will be completely restored from the ground up and by the time this boat is complete, it will be a brand new boat inside and out including the following:
Bostick Racing Engines Built 396/402 Big Block Chevy (Motor Build Thread Here: http://www.socaljetboats.com/index.php?topic=31761.0)
Freshly rebuilt pump by Place Diverter and Controls including droop, ride plate, and a hydraulic Place Diverter
Brand new Stringers installed by James Rankin
Freshly done Cap Job (Capping thread here: http://www.socaljetboats.com/index.php?topic=31869.0)
Brand new paint job by Khaos Kustom Paints (Mike Buschman and James Rankin) using donated Tamco Paint materials
Brand new Interior - two fiberglass buckets and a fiberglass bench
New cables, driveline/PTO, battery box, fuel fills, gauges, and steering wheel donated by CP Performance.
Battery donated by Battery Connection Inc
Restored trailer done by EBlast Dustless Sandblasting
Custom headers donated by Chad's Customs
Fiberglass Bench and Buckets donated by Twisted Liquid Marin
Check back to this thread for continued updates on this build.
This boat is being raffled off at the 2019 Horsepower Fest on November 16th, 2019 at the Avi Resort and Casino in Laughlin, NV. Tickets can only be purchased the day of the raffle at the raffle booth at Horsepower Fest. Winner must be physically present to win. For more information about the Horsepower Fest 2019 Raffle, please visit https://www.horsepowerfest.com/raffles/
-
One of the biggest setbacks was that when we purchased this boat back in June, it had carpeted stringers and the rear 1/4 was boxed in with aluminum angle rails. Once we removed these boxed in rails and the carpet underneith it, we discovered that the stringers were broken straight through to the floor and also split down the length of the boat where the front motor mounts were. Initially we were going to scrap this boat and start over once we discovered this, but James Rankin volenteered to replace the stringers. The boat will be going to him next week to bang out this job on an emergency basis as we are very limited on time.
-
Damn! Good luck! Tough job on short time.

Sent from my LG-TP450 using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Any pictures of the new stringers install?
-
Any pictures of the new stringers install?
The new stringer install hasnt begun yet. That will be taking place this week/weekend.
-
Got the headers from Chad Hundley over the weekend from Chad's Customs! They turned out amazing!
Sent from my SM-G965U using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Beautiful headers!!
Sent from my iPhone using SoCal Jet Boats
-
Got the headers from Chad Hundley over the weekend from Chad's Customs! They turned out amazing!
Sent from my SM-G965U using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
Them are some sexy headers!
Sent from my LG-TP450 using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Got the seats donated by Geoff at Twisted Liquid Marine in Lake Havasu City, AZ. Check then out!
Sent from my SM-G965U using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Quick update......James Rankin and Mike Buschman have been busting their ass. They got the boat flipped over and fixed some troubled areas including the cracked strakes.....the hit it with some filler primer then shot it with polyurethane single stage white and then clear. They are going to let it bake in the sun today then it will be ready to be flipped over and start on replacing the stringers and prepping the top for paint.
The trailer is over at e-blast dustless sandblasting in Menifee, CA....trailer has been blasted, they gotta weld up a few cracks, then they are going to primer it today.
-
What parts are still missing/needed?
-
Damn, you guys don’t mess around, it looks bitchen



Sent from my iPhone using SoCal Jet Boats
-
Damn! Looks great!!!
Sent from my SM-J727T using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
What parts are still missing/needed?
I am looking for water inlets and the outlet on the manifold. If anyone has these items and willing to donate, please PM me. Thank you!
-
I have but not New if you want
Sent from my SM-G930V using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
I am looking for water inlets and the outlet on the manifold. If anyone has these items and willing to donate, please PM me. Thank you!
I might have a waterneck, I'll check this evening.
-
I might have both if Grimpala doesn’t have them
Sent from my iPhone using SoCal Jet Boats
-
All pump parts have been stripped sanded and ready be mocked up and then the color then final assembly and new impeller and hardware

Sent from my iPhone using SoCal Jet Boats
-
I might have both if Grimpala doesn’t have them
Sent from my iPhone using SoCal Jet Boats
Crap, got busy with kids and forgot to check my stash. Just set myself a reminder to check when I get home.
-
Pump is done , just waiting on the boat lol eh brad hehehehehehhehehehe
Sent from my iPhone using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Still waiting on the paint n stringers to be done. I wish I could get it to you guys sooner, but I cant rush Buschman and Rankin anymore than I have or else they will give up on me lol
edit: pump looks great by the way! Thanks!
-
Crap, got busy with kids and forgot to check my stash. Just set myself a reminder to check when I get home.
I got a set of inlets and thermostat from Mike V. Thanks!
I am looking for a working basset T if anyone has one! Thanks!
-
I asked you what else you needed I have like three of those
Sent from my SM-G930V using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Still waiting on the paint n stringers to be done. I wish I could get it to you guys sooner, but I cant rush Buschman and Rankin anymore than I have or else they will give up on me lol
edit: pump looks great by the way! Thanks!
Lol just bustin yer balls brad lol , we will get it done when we get the boat . 
Sent from my iPhone using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
I got a set of inlets and thermostat from Mike V. Thanks!
I am looking for a working basset T if anyone has one! Thanks!
I have a Bassett T
Sent from my iPhone using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
I got a set of inlets and thermostat from Mike V. Thanks!
I am looking for a working basset T if anyone has one! Thanks!
I have a Bassett T
Sent from my iPhone using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Just picked up the seats from getting covered!
Sent from my SM-G965U using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Sorry man, it didn't cross my mind at the time but I got one on the way! Thanks anyways!
I asked you what else you needed I have like three of those
Sent from my SM-G930V using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
Sent from my SM-G965U using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Picked up the trailer yesterday from Scott at E-Blast dustless sand blasting in Menifee, CA. They did an amazing job. All new paint, wiring, lights and bunks!
https://www.facebook.com/eblastmobile/
-
Very nice
Sent from my iPhone using SoCal Jet Boats
-
Mike's working his magic trying to wrap up the paint today!
Sent from my SM-G965U using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
What kind of paint are you using? I’ve been trying to find someone to paint my boat, but I’m not sure if automotive paint is ok or not.. the boat certainly doesn’t sit in the water for more that an over night if even that long... pretty much no one around me wants to shoot it with regular paint.
Sent from my iPhone using SoCal Jet Boats
-
Looking forward to the pics of the finished paint this morning

Sent from my iPhone using SoCal Jet Boats
-
That trailer is sexy! Can a trailer be sexy??? Yes, yes it can. Can't wait to see the paint job.
Sent from my LG-TP450 using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
It's been a very long process to get to this point but the paint is finally done! We had some technical issues with some of the paints, but Khaos Kustom Paints (Mike Buschman and James Rankin) finally got her done late last night.
Big thanks to Tamco Paints for donating the materials and thank you to the following people who jumped in and helped out for the past few days...and thank you to their spouses/families for being understanding as we hammered through some very long nights.
James Rankin
Mike Buschman
Kelly Buschman
Brian Couey
Painter Dave
Joe Balakoski
Also thank you to Gary Lewis Electric for letting us use his paint booth!
We're super excited to have everyone come together next weekend to help us find this boat a new home!
Information about the raffle can be found here:
www.HorsepowerFest.com
Sent from my SM-G965U using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Absolutely fucking love it!!! Way to knock it out of the park!




gonna be an epic package. Somebody is gonna get an amazing boat! Wish I could be there to enter in the raffle....
Sent from my SM-J727T using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Looks awesome... You guys sure got a lot on your plate, but well worth it. 8) :thumbup:
-
We hopefully get the boat Monday to install the pump and hydraulic unit and get it to it’s next place . Will be at the place Diverter stall at the fest and brad is buying the beers lol
Sent from my iPhone using SoCal Jet Boats
-
Darrell and I got the stringers out and now sanding down the old carpet glue. Keep on truckin. Failure is not an option!
Sent from my SM-G965U using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Almost 1am and still at it....trying to get all the glue off the floor so the fiberglass bonds when we go to overlay the stringers
Sent from my SM-G965U using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Good job brad

Sent from my iPhone using SoCal Jet Boats
-
Installing new stringers today

Sent from my SM-G965U using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Shit, got to hand it to you guys, the dedication you guys put into that thing for a good cause, and someone gets a really nice piece. Nice job, can’t wait to see it next weekend
Sent from my iPhone using SoCal Jet Boats
-
Stringers are cut n shaped....jig setup as well. We're about to set them in
Sent from my SM-G965U using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Stringers are set....
Sent from my SM-G965U using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
You guys are killing it!!!
Sent from my Pixel 3 XL using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Stringers are glassed in. Gunna set the intake while we wait for the resin to cure.
Sent from my SM-G965U using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
What did you paint the stringers with or is that just a stain?
-
What did you paint the stringers with or is that just a stain?
It's a stain
Sent from my SM-G965U using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Bryan Couey came by to assist with setting the intake back in the boat then we glassed in the sub floor and bulkhead. Today we're gunna be at Place Diverter & Controls to have Tim and his team put the pump in and rig everything associated with it.
Sent from my SM-G965U using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Need a BBC Oil pan ASAP in North orange county
Sent from my SM-G965U using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Stars before stripes, looks killer tho
Sent from my iPhone using SoCal Jet Boats
-
Stars before stripes, looks killer tho
Sent from my iPhone using SoCal Jet Boats
Let see the finished product and how did the raffle go for the chairty
Sent from my XT1635-01 using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Soooo did this boat ever get finished?
Sent from my iPhone using SoCal Jet Boats
-
Soooo did this boat ever get finished?
Sent from my iPhone using SoCal Jet Boats
I am sure it did , wasn’t much left to do when it left hp fest , simple rigging . Water lines and fuel lines .
Sent from my iPhone using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
I am still in possession of the boat. I have been in regular contact with Tom who won the boat. He's not in a rush to get it due to it being winter.
I worked on it a few weekends ago. Finished up all the wiring under the dash, fixed an issue with the hydraulic pump wiring, ran all the fuel lines, and re-installed the headers with gaskets.
I just need to finish running the water lines and put some oil in it, then take it out and give it a shake down so all is good when I hand the keys over to Tom, which should be within the next few weeks once I find some time.
-Brad
-
Sweet! Love to see it done. I hope it raised a lot of money!
Sent from my iPhone using SoCal Jet Boats
-
I am still in possession of the boat. I have been in regular contact with Tom who won the boat. He's not in a rush to get it due to it being winter.
I worked on it a few weekends ago. Finished up all the wiring under the dash, fixed an issue with the hydraulic pump wiring, ran all the fuel lines, and re-installed the headers with gaskets.
I just need to finish running the water lines and put some oil in it, then take it out and give it a shake down so all is good when I hand the keys over to Tom, which should be within the next few weeks once I find some time.
-Brad
Sweet brad ..... get her done 


Sent from my iPhone using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
I got some parts I can help with let me know what else your looking for ,I'd like to help Brad😎