[Dirty Air]

Stuff needs to go so I can finish my boat! All items are plus shipping or pick up. call or P.M. me with any questions: Deryl 702-449-2684
List:
Dominator pump SOLD
Menkens V-drive
8mm blower pulley
1/2 pitch blower pulley
2 blower belts 1 new 1 used
edelbrock logs and snails for OLDS
Bassett T valve SOLD
Berkley transom adaptor
BBC chrome timing cover SOLD

Dominator MB12S pump, Impeller is alum. large C or small B.  bearings and wear ring in very good shape. Bowl is polished (but not very well, could stand to be re done) Suction housing needs cleaned and painted. (This pump came out working perfectly) I'm open to a fair offer  "not" the standard SCJB offer LOL SOLD $300
[attach=1]

[attach=2]

[attach=3]
Menkens  V-drive (came out of working boat) appears to have somewhere between 10% to 15% overdrive gears in it. In/out gear leaver works very smooth. Is missing 1 aluminum strut brace (Easy to make) I'm open to a fair offer  "not" the standard SCJB offer LOL
[attach=4]

[attach=5]

[attach=6]
Continued on next page

[Dirty Air]

63 tooth 8MM blower pulley $25
[attach=1]
34 tooth 1/2 inch pitch pulley $25
[attach=2]
New 1/2 inch pitch blower belt Gates Powergrip (57 in.) 570H300 $50
[attach=3]
used in good shape 1/2 inch pitch blower belt (58.5 in.)  585H300 $25
[attach=4]
Edelbrock logs and snails for OLDS ( in so-so shape) there is a small crack on one side (see 2nd pic) It could be tig welded relatively easy. Make offer
[attach=5]

[attach=6]
Continued on next page

[Dirty Air]

Used Bassett T valve in working condition. (I would replace the check ball and spring) $25  SOLD!
[attach=1]
Berkley transom adaptor in good shape (needs cleaning) Make offer
[attach=2]
NEW BBC chrome timing cover with front seal. It is new, never installed but out of package.
 AC Delco part #141-216 for early gen.4  "not" mark 5 or gen. 6 $20   SOLD!
[attach=3]

[CHROMEY]

) I'm open to a fair offer  "not" the standard SCJB offer LOL

this guy must be new?

[Dirty Air]

timing cover is sold.....thanks B.P.

[HDriderTH]

Lemme check belt lenght on boat and pullies on small block (car).

[Dirty Air]

T- valve is sold....Thanks,   74HONDO

[74hondo]

T- valve is sold....Thanks,   74HONDO

Thank you! Money is already sent.

[IRRebel]

Blower belts on yer boat are 1/2" Terry, and the blower for your car, when I saw it, were the same. Although I did see more than a few 8mm pulleys laying around.......

Ray

[HDriderTH]

ok, I got a 44 crank pulley and a 40 top pulley with a 60 lnch belt. I'm trying to put a new Magnaflow water pump on my boat but the lower pulley is too big. So, I'm thinkin maybe your 34 on top and my 40 on bottom with your 57" or 58.5 belt. What kinda shap is the 58 in? Any body know the formula for over drive percentage?

[Dirty Air]

HDrider check your PM's

[Dirty Air]

Dominator pump is SOLD!

[42johnny]

how much for the vdrive??

[Dirty Air]

how much for the vdrive??

PM sent

[Dirty Air]

I still have the edelbrock logs and snails for OLDS $40 There is that much in scrap aluminum (50lbs.)
I still have Berkley transom adapter $20
I still have the blower pulleys and belts
I still have The menkens V-drive
I also have a OLDS P.T.O adapter, flywheel and cast aluminum flywheel cover/rear mount (not pictured)