SoCal Jet Boats

Discussion => The No Wake Zone => Topic started by: enginedoctor on April 22, 2008, 07:13:16 PM

Title: Engine Assy Tips...Part 6.
Post by: enginedoctor on April 22, 2008, 07:13:16 PM

Anyone out there need pointers ??? If so post it and I will follow - up.  :)

Title: Re: Engine Assy Tips...Part 6.
Post by: 429heads on April 22, 2008, 07:36:19 PM

It might help if you tell what machines you have in you shop Type valve Grinder ,Seat and Guide machine, head surfacer, Show what you have to work with, and some good pictures, And how up put guide liners in start to finish  ::),  And what is the pest part of your head work, I have lot of questions to ask .

Title: Re: Engine Assy Tips...Part 6.
Post by: beerjet on April 22, 2008, 08:13:00 PM

Go to www.AandDengines.com and have a look for yourself  :) It absolutly amazes me how someone WITH expereince of running and owning his own machine and engine shop comes on HERE to give insight and is open to questions and constructive critizism and has been recieved with the fury of a pack of hungery lions . Not the SCJB freindly welcome I'm used to seeing handed out here . I personally will be goin to his shop to see if I like what I see and hear and will be making my own decision on wheater or not to take Davids advise .

Thank you David , Tom and any other willing to stick your necks way out for us and I'm just out of words to say  :-\

-beerjet-

Title: Re: Engine Assy Tips...Part 6.
Post by: BOOST on April 22, 2008, 08:20:33 PM

Quote from: beerjet on April 22, 2008, 08:13:00 PM

Go to www.AandDengines.com and have a look for yourself  :) It absolutly amazes me how someone WITH expereince of running and owning his own machine and engine shop comes on HERE to give insight and is open to questions and constructive critizism and has been recieved with the fury of a pack of hungery lions . Not the SCJB freindly welcome I'm used to seeing handed out here . I personally will be goin to his shop to see if I like what I see and hear and will be making my own decision on wheater or not to take Davids advise .

Thank you David , Tom and any other willing to stick your necks way out for us and I'm just out of words to say  :-\

-beerjet-

well said Omar

Title: Re: Engine Assy Tips...Part 6.
Post by: GlassCutter on April 22, 2008, 08:37:59 PM

Ladies and Gentlemen       Let me introduce    The Kinder, Gentler, all around good guy . . .  Beerjet  :-*

Title: Re: Engine Assy Tips...Part 6.
Post by: beerjet on April 22, 2008, 08:55:53 PM

Quote from: GlassCutter on April 22, 2008, 08:37:59 PM

Ladies and Gentlemen       Let me introduce    The Kinder, Gentler, all around good guy . . .  Beerjet  :-*

  :sly:  ;D

-beerjet-

Title: Re: Engine Assy Tips...Part 6.
Post by: flytime on April 22, 2008, 09:07:20 PM

Quote from: beerjet on April 22, 2008, 08:13:00 PM

Go to www.AandDengines.com and have a look for yourself  :) It absolutly amazes me how someone WITH expereince of running and owning his own machine and engine shop comes on HERE to give insight and is open to questions and constructive critizism and has been recieved with the fury of a pack of hungery lions . Not the SCJB freindly welcome I'm used to seeing handed out here . I personally will be goin to his shop to see if I like what I see and hear and will be making my own decision on wheater or not to take Davids advise .

Thank you David , Tom and any other willing to stick your necks way out for us and I'm just out of words to say  :-\

-beerjet-

Well put Omar. This guy has spent alot of time posting some great advise/tips here for alot of people that I am sure needed some help. They should be loading this guy up with some good karma ???

Title: Re: Engine Assy Tips...Part 6.
Post by: jet boat performance on April 22, 2008, 09:23:05 PM

Engine doctor its good of you to take the time to volunteer and impart your experience & knowledge here Welcome to socaljetboats I'm sure the folks here will have lots of questions for you ,even after 30+ I still learn and still have questions   Tom