SoCal Jet Boats

Discussion => The No Wake Zone => WarZone => Topic started by: Myles Glance on January 27, 2020, 06:41:10 AM

Title: Setting in and out water valves
Post by: Myles Glance on January 27, 2020, 06:41:10 AM

This is my very first boat, and need help figuring out how to adjust the in and out water valves correctly.

Title: Re: Setting in and out water valves
Post by: bobjthomson on January 27, 2020, 07:46:40 AM

This is easy , the valve that is coming off the pump is to control water temp in ur block . Run the valve closed and then turn it back to about half , the one on the other side will help with the temp as well as u want to keep the water in long enough to have heat transfer. Now if the other valve is for the headders then u don’t open them till the motor is running and switch the valve closed when u about to shut down .


Sent from my iPhone using SoCal Jet Boats