[mr_ssalas]

Anyone know where I can get one of these tee's, I looked for AN fittings but nothing goes to hose thread, this one is plastic and cross threaded


Sent from my iPhone using SoCal Jet Boats

[WhyNot76]

There is hose clamps there, those aren't threaded on.


Sent from my iPhone using SoCal Jet Boats

[WhyNot76]

You have these


Sent from my iPhone using SoCal Jet Boats

[mr_ssalas]

Ya, those are still good, I need the tee, that black cap is on what looks to be ¾ hose thread that's messed up


Sent from my iPhone using SoCal Jet Boats

[mr_ssalas]

Just came across this, I'd prefer a metal one if anybody knows where to get one


Sent from my iPhone using SoCal Jet Boats

[WhyNot76]

Ya, those are still good, I need the tee, that black cap is on what looks to be ¾ hose thread that's messed up


Sent from my iPhone using SoCal Jet Boats

oh I gotcha, I thought you were thinking that those ends were threaded on, my bad, you can find those tees in stainless or brass, or make one up yourself.👍🏼👍🏼


Sent from my iPhone using SoCal Jet Boats

[el mojado]

Home depot

[garytcosta]

If you are feeling like you want to make it up, as suggested, here's a parts breakdown.  (I used 5/8" hose fittings, but if you have 1/2" hose, those fittings are just as a available.  Home depot should carry all the parts indicated.  If you are in O.C., I like to use McFadden Dale Hardware.
[attachimg=1]

[WhyNot76]

If you are feeling like you want to make it up, as suggested, here's a parts breakdown.  (I used 5/8" hose fittings, but if you have 1/2" hose, those fittings are just as a available.  Home depot should carry all the parts indicated.  If you are in O.C., I like to use McFadden Dale Hardware.
[attachimg=1]

X2 on McFadden dale, there's also one in Ontario that I go to.👍🏼 great place.


Sent from my iPhone using SoCal Jet Boats

[Your Mom]

Home depot

X2 on HD... most auto part stores will carry the cheapo plastic one.

[el mojado]

Mcfadden Dale is like a really good Home Depot without all the crap you dont need. Lots of cool shit in there. They close at 5pm during the week and 12 or 1 on saturdays. Awesome place, clean, and organized. But a little pricey. But you will find what you are looking for.

[WhyNot76]

Mcfadden Dale is like a really good Home Depot without all the crap you dont need. Lots of cool shit in there. They close at 5pm during the week and 12 or 1 on saturdays. Awesome place, clean, and organized. But a little pricey. But you will find what you are looking for.

I have to walk in with my guard up, soooo much cool stuff in there to throw money at LOL


Sent from my iPhone using SoCal Jet Boats

[mr_ssalas]

Thanks for all the feedback guys, really appreciate it


Sent from my iPhone using SoCal Jet Boats

[SomeThingWilder]

I used a tee like this then just got a garden hose adapter  and screwed it onto the NPT , works great for me

[GT Jets]

I guess I have been completely over simplifying my junk.

From the jet pump to a barb by 3/4 mpt fitting into a 3/4" ball valve to a 3/4" mpt to 3/4" hose bibb adapter,  to a garden hose female to hose barb. Done.

About $25 in parts.

[Derrick]

They sell the same plastic deal at autozone for a couple dollars.


Sent from my iPhone using SoCal Jet Boats

[gavieboy]

There is a McFadden dale in corona off maple and the 91 go north and its on your right hand side next to the cal trans office


Sent from my iPhone using SoCal Jet Boats

[GT Jets]

They sell the same plastic deal at autozone for a couple dollars.


Sent from my iPhone using SoCal Jet Boats

No plastic.

In not trusting some temporary Chinese piece of garbage to keep my boat floating.

Brass or nothing, and even that is sometimes questionable.

GT

[BoatsNhoes]

No plastic.

In not trusting some temporary Chinese piece of garbage to keep my boat floating.

Brass or nothing, and even that is sometimes questionable.

GT

GT how about 316 SS Have all the parts needed in my maintenance shop . Would still recommend the brass??? 😎 I'm good with it "


Sent from my iPhone using SoCal Jet Boats

[GT Jets]

GT how about 316 SS Have all the parts needed in my maintenance shop . Would still recommend the brass??? 😎 I'm good with it "


Sent from my iPhone using SoCal Jet Boats

I use brass because it's readily  available, strong,  corrosion resistant and cheap.

If you have access to stainless fittings  (most of us do not), think about how much better that would be than a piece of ABS.

Most stainless I have used has been unreasonably heavy, not to mention expensive.

GT

[cmayer]

I use brass because it's really available, strong,  corrosion resistant and cheap.

If you have access to stainless fittings  (most of us do not), think about how much better that would be than a piece of ABS.

Most stainless I have used has been unreasonably heavy, not to mention expensive.

GT

Speaking of heavy, how do you secure the 3/4 mpt fitting, 3/4" ball valve, 3/4" mpt, 3/4" hose bibb adapter, garden hose female, hose barb combo? Just clamp it to the stringer?

Mine's setup so the the engine flush part is removable when I'm not using it. However, everything else just rests on the floor of the bilge and I'm not a fan of that.

[Blue2184]

I use brass because it's readily  available, strong,  corrosion resistant and cheap.

If you have access to stainless fittings  (most of us do not), think about how much better that would be than a piece of ABS.

Most stainless I have used has been unreasonably heavy, not to mention expensive.

GT

Gt I bet that's fixing to change... I work in the wholesale plumbing industry and have for prob the last 18 years or so... We are fixing to change all of our brass fittings and nipples over to stainless steel... Copper and brass are slowly pricing their selves out of the market... We can buy the ss fittings cheaper than we can the brass... It's just getting the set in their way plumbers to change lol


Sent from my iPhone using SoCal Jet Boats

[BoatsNhoes]

I use brass because it's readily  available, strong,  corrosion resistant and cheap.

If you have access to stainless fittings  (most of us do not), think about how much better that would be than a piece of ABS.

Most stainless I have used has been unreasonably heavy, not to mention expensive.

GT

Got it" you da man"😎👍


Sent from my iPhone using SoCal Jet Boats

[GT Jets]

Gt I bet that's fixing to change... I work in the wholesale plumbing industry and have for prob the last 18 years or so... We are fixing to change all of our brass fittings and nipples over to stainless steel... Copper and brass are slowly pricing their selves out of the market... We can buy the ss fittings cheaper than we can the brass... It's just getting the set in their way plumbers to change lol


Sent from my iPhone using SoCal Jet Boats

I am a 20 year journeyman pipefitter. Your preaching to the choir. Lol