[Brad @ SCJB]

a wize man once told me...."the more you spend, the worse it fits"

today that just bit me in the ass.

so i bought this new carb....expensive pretty damn thing, but why the FOCK cant QFT follow the standard?

Here is what I am up against....the standard bowl inlet for dominators....4150's as well....is 7/8" 20 threads.

the bowls on this carb (from the best i can tell) are 3/4" holes with unknown threads.

The red adapter which was in the bowl when i got it is 3/4 on one end....other is -6
The blue end is the fuel rail with the standard 7/8" thread.

[attachimg=1]

besides calling QFT....anyone know what fuel rail to buy? i did some summit & jegs searching and im stumped. The specs on the fuel lines are so vague when it comes to inlets...even the pricey QFT fuel lines dont say wtf inlet size they are. just what size of line they are (-6 or -8)

[Brad @ SCJB]

btw....reason i dont want to call QFT....i know i'll get the answer of "ohhh....you need this fuel rail that costs $250" 

[Luckie Stiff]

You need a -8AN Male O Ring X -8 flare adapter, try Earl's or Russel

[TJS Nordic]

The red fitting looks like -10AN O-ring or maybe an -8AN O-ring.  Have you thought about fabricating a fuel rail.
T.J.

[Brad @ SCJB]

You need a -8AN Male O Ring X -8 flare adapter, try Earl's or Russel

youre right. i took a male -8 fitting and it threaded right up in there. i'll refine my searching on summit/jegs now

Have you thought about fabricating a fuel rail.
T.J.

i wish i had the skills like you do to build sweet shit 

[Luckie Stiff]

"Male AN flare to male O Ring Boss - Anodize

These are made in house right here in So. Cal by an American.  They are back from the anodizer.  The standard color is blue but we also have black and the raw finish.  Please note if you want a color other then blue."

Welcome to Sweet Performance Products
Your source for CPE Stainless Steel Braided hose, Smooth Bore Stainless Steel Braided Teflon hose, Push Lok hose, DOT Stainless Braided brake lines and hoses. We also offer a wide assortment of hose ends, AN fittings, weld bungs, adapters including brake system adapter fittings, banjos and other components. If you do not see it on this site please ask.

714 223 9322

[Brad @ SCJB]

not 100% what i need. I really dont want to piece together another fuel rail...so im looking for these pieces....-8 o-ring to -8an

http://www.summitracing.com/parts/AED-6091/

summit has them listed here http://www.summitracing.com/parts/QFT-19-108/ ...but no picture...so im not sure its exactly what i need.

[Luckie Stiff]

The one from Sweet is exactly what you need, notice the O-ring on yours? Notice the O-ring on Sweet's piece? Why don't you return the ill fitting fuel rail and get the proper one from QFT?

[Brad @ SCJB]

The one from Sweet is exactly what you need, notice the O-ring on yours? Notice the O-ring on Sweet's piece? Why don't you return the ill fitting fuel rail and get the proper one from QFT?

because they are too short, the rail wont clear the carb linkage.

this is what i need..... http://www.summitracing.com/parts/QFT-34-800/?image=large

i was trying to avoid the hassle of buying a whole new rail and just getting the parts i need.

[Luckie Stiff]

Seems like the hassle is monkeydicking around trying to make shit work. Can't you send the one you have back and get the other one? Or sell the other one?

[Brad @ SCJB]

Seems like the hassle is monkeydicking around trying to make shit work. Can't you send the one you have back and get the other one? Or sell the other one?

thats what im gunna do...

[Luckie Stiff]

 

[Brad @ SCJB]

 

[TJS Nordic]

Brad,

What are you looking for in a fuel rail. Maybe I can help. Ross machine makes some nice “D” shaped fuel rail stock in 2 sizes. The bigger the better though. I can cut the ends of the bigger fuel rail to -10AN O-ring fittings. Then machine the “flat” side of the fuel rail for -8AN fittings that match the carb. center to center spacing for the inlets. The inlets would consist of ½ “ stainless hard line (McMaster) using tube nuts and collars from Sweet or Summit. I have the 37 degree flaring tool which is needed for the stainless hard line. 


Sooooo, you would need a length of fuel rail material (pretty cheap at Ross Machine).
Then a short length of ½ stainless tubing at McMaster. (2 )8AN to 3/8 NPT fittings, 4 tube nuts and collars size -8AN. Plus -10AN O-ring fittings. Are you returning back to the tank from a regulator on the rail ?

Let me know if I can help.

[GlassCutter]

I sure hope my kid never has to compete against your kid at the science fair 

[Brad @ SCJB]

thanks for the help....but i spent the $105 on the QFT proprietary hardware 

should be here tomorrow.

[Brad @ SCJB]

because they are too short, the rail wont clear the carb linkage.

this is what i need..... http://www.summitracing.com/parts/QFT-34-800/?image=large

i was trying to avoid the hassle of buying a whole new rail and just getting the parts i need.

so i bought the fuel rail listed above...and i got bit again 

remember the theme here "the more you spend, the worse it fits"

so the above summit listing for the part doesnt state its for a 4500 or 4510. And with the luck I'm having, its for a damn 4150. I know the smart thing would be to return it. We'll, im in a bind - the engine goes on the dyno monday morning. so I took the 4500 rail with the 7/8" fittings and changed them out for the -8 o-ring fittings that came with the QFT fuel rail. ....now i have an over priced contraption that works. 

[76NORDIC]

Dang Brad, it seems like if you didn't have bad luck, you wouldn't have any luck at all

[OC2Vegas]

At least you have something that gonna get you to the dyno! Lets see the dyno sheets when you have them!

[Brad @ SCJB]

At least you have something that gonna get you to the dyno! Lets see the dyno sheets when you have them!

one should never reveal their weapon before going to battle. 

maybe after turkey day 

[OC2Vegas]

Ahhh, very true grasshoper!

[Ralph Brunt]

remember the theme here "the more you spend, the worse it fits"

hehehe

[GT Jets]

one should never reveal their weapon before going to battle. 

Soooooo you're not going to fudge the numbers in reverse?  That's how I roll. 

I had a "330 HP 427 Chevy" in a 19' hull that did a tick over 85 MPH...    

GT

[Nordie]

Haha I was at brads tonight and I don't think he wanted me to even see the motor!!!! I don't fudge numbers I think I'm at 270 hp...anyway baxk to the thread...I saw the motor his chinga dera actually looks good it will get the job done

[GT Jets]

Haha I was at brads tonight and I saw his chinga dera actually looks good it will get the job done

Careful..

 

GT