[carrera202]

Got most of the foam out and pulled the kachina signs off and started to pull the rub rail off we will get the rest of the foam out tomorrow and start sanding


Sent from my iPhone using SoCalJetBoats

[carrera202]

New tanks


Sent from my iPhone using SoCalJetBoats

[carrera202]

More foam out, rub rail off and off the trailer and on a dolly


Sent from my iPhone using SoCalJetBoats

[carrera202]

making good progress... 

were tryin thanks man👍👍


Sent from my iPhone using SoCalJetBoats

[carrera202]

if you're going to redo the stringers my only suggestion would be to change the points where your dolly is supporting the hull.  you want it on the very back corners and the bow eye or else when you cut em out the pressure in the middle/forward will put a hook into the bottom of the hull and when you glass in the new stringers it'll be stuck there forever.  just a fyi.

thanks brother I knew it has to have some tweaks to it before I cut the stringers out now I know where it needs to be and will add support this week and make sure it's solid more pics to come I do appreciate all advise and comments


Sent from my iPhone using SoCalJetBoats

[carrera202]

Well finally got the dolly started got a few more supports to add but atleast now it's built and pressure washed the rest of the foam out


Sent from my iPhone using SoCalJetBoats

[carrera202]

Finally got the dolly squared away and now the sanding starts todaysthefirst day


Sent from my iPhone using SoCalJetBoats

[carrera202]

you're gonna be ITCHY!

hahaha ya I am the only good thing is it's cold so hopefully with the long sleeves and pants I hope it won't be toooo bad


Sent from my iPhone using SoCalJetBoats

[jyeager]

I feel your pain bud!

[carrera202]

I feel your pain bud!

haha thanks jake 🍻


Sent from my iPhone using SoCalJetBoats

[carrera202]

It's been a while but here are some pics of the progress in the past few weeks


Sent from my iPhone using SoCalJetBoats

[jyeager]

looking good buddy!

[daniel.sykes]

I just did the same thing to my 94 kachina and reinforced the bow because it seemed like it was just to weak looks good though man . I have pics if you want to see what I did

[carrera202]

I just did the same thing to my 94 kachina and reinforced the bow because it seemed like it was just to weak looks good though man . I have pics if you want to see what I did

ya that would be awesome man I appreciate it I'm new at all of this so I'll take any advise I can get and the help which I have been getting a great deal of but ya thanks man and share the pics would be cool to see for sure


Sent from my iPhone using SoCalJetBoats

[daniel.sykes]

I put my braces going with the bow instead of across sideways. no reason that's just how I did it

[daniel.sykes]

can only post one at a time sorry

[daniel.sykes]

another

[daniel.sykes]

these are before I cleaned it up. im not the best at fiberglassing

[daniel.sykes]

That sucks I just read the end of that

Sent from my XT907 using SoCal JetBoats mobile app

[carrera202]

these are before I cleaned it up. im not the best at fiberglassing

that looks good man how's your progress on her now? I have the support in the middle is your deck balsa?


Sent from my iPhone using SoCalJetBoats

[daniel.sykes]

No its not balsa just glass but the center support I extended up to the bow eyelet just because I'm not the lightest person in the world

Sent from my XT907 using SoCal JetBoats mobile app

[carrera202]

No its not balsa just glass but the center support I extended up to the bow eyelet just because I'm not the lightest person in the world

Sent from my XT907 using SoCal JetBoats mobile app

oh ok gotcha ya we found out that the deck is balsa in ours I was just curious how's the project comin along for you


Sent from my iPhone using SoCalJetBoats

[daniel.sykes]

its upside down now previous owner put some gouges in the bottom and theres an 1/8" to 3/16" hook to take care of 

[carrera202]

its upside down now previous owner put some gouges in the bottom and theres an 1/8" to 3/16" hook to take care of

that sucks we willbe doin ours after the floor is done


Sent from my iPhone using SoCalJetBoats

[carrera202]

Well now that my hand finally healed most of the way it was back to starting the sanding process today here's the progress today I only took a few


Sent from my iPhone using SoCalJetBoats