What did you do to your boat today?

« **Reply #50 on:** February 27, 2014, 08:06:59 PM »

Quote from: Riverlife_ on February 27, 2014, 05:37:31 PM

Got my Carb all Rebuilt, also picked up all new stainless hardware for the new intake & made a template of my inner fenders on the trailer to make some new ones.

Sent from my iPhone using SoCalJetBoats

Is that the manifold i told you about from that guy?

Sent from my iPhone using SoCalJetBoats

« **Reply #51 on:** February 27, 2014, 08:21:11 PM »

Hey Phil, no that's just another Victor Jr. He's been out of town until tomorrow night, so on sat I'm going to go down there and pick it up, I talked to him today

Sent from my iPhone using SoCalJetBoats

« **Reply #52 on:** February 27, 2014, 11:26:18 PM »

Quote from: who yo daddy on February 27, 2014, 08:06:33 PM

That's a water drain for the block small ball valve

Sent from my iPhone using SoCalJetBoats mobile app

Gotcha. That is a good idea. i just learned something today!
Is there one on both sides?

« **Reply #53 on:** February 28, 2014, 05:37:52 AM »

Took a glance at it as I pulled the snowmobile past it.-6 degrees this morning. Bracing for titan

Sent from my SCH-I535 using SoCal Jet Boats mobile app

« **Reply #54 on:** February 28, 2014, 05:42:54 AM »

Quote from: srx98jj on February 28, 2014, 05:37:52 AM

Took a glance at it as I pulled the snowmobile past it.-6 degrees this morning. Bracing for titan

Sent from my SCH-I535 using SoCal Jet Boats mobile app

Yikes. Where you from?

« **Reply #55 on:** February 28, 2014, 06:03:34 AM »

Northeast Ohio. ..vienna to be exact.

Sent from my SCH-I535 using SoCal Jet Boats mobile app

« **Reply #56 on:** February 28, 2014, 01:16:37 PM »

Just a little painting

Sent from my iPad using SoCalJetBoats

« **Reply #57 on:** February 28, 2014, 02:31:47 PM »

Looking good

Sent from my SCH-I545 using SoCal Jet Boats mobile app

« **Reply #58 on:** February 28, 2014, 04:32:07 PM »

I stood over it in my garage while watching the rain and through a empty beer can in it

Sent from my iPhone using SoCalJetBoats

« **Reply #59 on:** February 28, 2014, 05:37:15 PM »

Quote from: lupo1904 on February 28, 2014, 04:32:07 PM

I stood over it in my garage while watching the rain and through a empty beer can in it

Sent from my iPhone using SoCalJetBoats

No kidding! It's dumpin hear. Massive thunder. At least the boat will have water to float on.

« **Reply #60 on:** March 02, 2014, 09:06:05 AM »

Pulled motor and pump. New heads, complete Comp Cam valve train, Edelbrock Torker II single plane intake, all new fasteners, and polished the aluminum. Back into the boat. Almost time to fire it up!

Sent from my iPhone using SoCalJetBoats

« **Reply #61 on:** March 02, 2014, 09:19:13 AM »

Fired mine up last night at about 9:30 to wake the neighborhood up. And get my blood flowing.

Sent from my iPhone using SoCalJetBoats

« **Reply #62 on:** March 02, 2014, 10:02:06 AM »

Finished with the polishing!!!!!!!

« **Reply #63 on:** March 02, 2014, 11:58:26 AM »

Looks awesome!

Sent from my iPhone using SoCalJetBoats

« **Reply #64 on:** March 02, 2014, 11:59:05 AM »

Looks awesome!

Sent from my iPhone using SoCalJetBoats

« **Reply #65 on:** March 02, 2014, 01:18:16 PM »

New painted fenders and new fender liners installed on my nephews trailer

SRC 🚤💨

« **Reply #66 on:** March 02, 2014, 01:29:26 PM »

Got the new Intake Edlebrock Victor Jr.
Carbs all rebuilt and got the new scoop and arrestor cleaned up and mocked up. Also I made new inner fenders, just have to throw some resin and carpet.

Sent from my iPhone using SoCalJetBoats

« **Reply #67 on:** March 02, 2014, 03:50:38 PM »

Quote from: uncleBOBBY on March 02, 2014, 01:18:16 PM

New painted fenders and new fender liners installed on my nephews trailer

SRC 🚤💨

I really need to do that. Just need to find something to get my fat ass off the couch!!!
Did manage to take the family cruiser to the channel today.

Sent from my iPhone using SoCalJetBoats

« **Reply #68 on:** March 02, 2014, 06:00:07 PM »

Spent my day trying to smooth out my intake. It's time consuming

Sent from my iPhone using SoCalJetBoats

« **Reply #69 on:** March 02, 2014, 06:05:08 PM »

My uncle slammed out a flex plate adapter and we got one step closer on the motor

« **Reply #70 on:** March 02, 2014, 06:08:04 PM »

Quote from: MorePower on March 02, 2014, 06:05:08 PM

My uncle slammed out a flex plate adapter and we got one step closer on the motor

looks good

Sent from my iPhone using SoCalJetBoats

« **Reply #71 on:** March 02, 2014, 06:28:21 PM »

Mocked up my water/fuel separator parts. Waiting for warmer/dryer weather so I can paint everything and get ready to install. Also stopped by Elsinore Marine off Grand Ave. for the first time and was pleasantly surprised at their inventory for those last minute things I may need on my way to launch.

Sent from my iPhone using SoCalJetBoats mobile app

« **Reply #72 on:** March 02, 2014, 07:11:18 PM »

Change the oil they said...it's all you need they said....

-beerjet-

« **Reply #73 on:** March 02, 2014, 07:15:37 PM »

This is how I left it tonight....

-beerjet-

« **Reply #74 on:** March 02, 2014, 07:16:34 PM »

Did you miss the drip pan? Lol

Sent from my SCH-I535 using SoCal Jet Boats mobile app

RushinEliminator17

Riverlife_

holorinhal

srx98jj

Bunger

srx98jj

jamiemwedmore1234

rush1

lupo1904

FordLover

Roadrunner

Jet Boat Maloney

JacksEliminator

Roadrunner

Roadrunner

uncleBOBBY

Riverlife_

Jet Boat Maloney

53draggin

MorePower

Riverlife_

GoinBrokeBahner

beerjet

beerjet

riverrat4life