[beerjet]

Little bit better.... at least now I can get the buffer down and around the exhaust.

-beerjet-

[srx98jj]

Picked up my newly redone seats . Changed color up a little bit....still in the 30's here abd over 2ft of ice one our local lakes, so I have time.lol

Sent from my SCH-I535 using SoCal Jet Boats mobile app

[beerjet]

Picked up my newly redone seats . Changed color up a little bit....still in the 30's here abd over 2ft of ice one our local lakes, so I have time.lol

Sent from my SCH-I535 using SoCal Jet Boats mobile app

Those are couches!
Or you're a really really really really small man....
Either way, they good!

-beerjet-

[srx98jj]

Lol.  Just the back seat Beerjet .  I need to be real comfortable when enjoying a cold one.....

Sent from my SCH-I535 using SoCal Jet Boats mobile app

[HardLuck Baker]

Picked up heads from the machine shop, so now I'm ready to get it back together. Summer is coming quick!


RoB~SoCalJetBoats~

[Squirrel Master]

Picked up heads from the machine shop, so now I'm ready to get it back together. Summer is coming quick!


RoB~SoCalJetBoats~
[/quote

thats alot of head 

[Riverlife_]

Got the carb intake scoop distributor & more anodized purp stuff & the last pic stands. *bow tie baby*


Sent from my iPhone using SoCalJetBoats

[keithwidney]

I bought a moroso oil pan with pick up tube for $100 plus 3 hours drive time.

[Cliffjumper]

Getting ready to put my polished intake back on cause I think I have a water leaking into my oil on the black intake

Sent from my SPH-L720 using SoCal Jet Boats mobile app

[got the squirts]

New gauges and bezels cleaned her up a bit if it's nice might take her out tomorrow


Sent from my iPhone using SoCalJetBoats

[Havasukona455]

New gauges and bezels cleaned her up a bit if it's nice might take her out tomorrow


Sent from my iPhone using SoCalJetBoats

Really clean boat man. That's exactly what I'm looking for.


Sent from my iPhone using SoCal Jet Boats

[Cliffjumper]

Ok so found my water leak. Anyone want some fresh whip cream.

Sent from my SPH-L720 using SoCal Jet Boats mobile app

[SoCalPSD]

So was it the intake


Sent from my iPad using SoCalJetBoats mobile app

[Cliffjumper]

No the gasket was pinched

Sent from my SPH-L720 using SoCal Jet Boats mobile app

[mnewman]

well lets see, installed the motor, pump, batteries, swim step and brackets, exhaust flaps, plumbing for the pump and motor, new bilge pump, windshields, ( GAS PEDAL, FOR THOSE OFF YOU FLLOWING ALONG, NOT EVEN MY PEDAL, JACKASS GAVE ME SOMEONES ELSES STUFF), misc. electrical, new trailer jack, scrubbed all the interior...

today, finish wiring interior and stereo, throw interior back in, wax outside....fire it up and get er on the water next weekend.....

after that...not a damn thing.. I wanted to say thanks to all the Vista Murrieta High Schools kids that helped me put together this beast yesterday, they should all pass shop with flying colors, LOL

[renegade]

Pulled pump apart and shimed impeller to factory specs. Was out ten thousands.

Sent from my SCH-I535 using SoCal Jet Boats mobile app

[JetBoatJesse]

Skee came by and grabbed the intake, carb, and starter. So now I can get rolling on the new motor install

Sent from my SGH-M919 using SoCal Jet Boats mobile app

[GT Jets]

Pulled pump apart and shimed impeller to factory specs. Was out ten thousands.

Sent from my SCH-I535 using SoCal Jet Boats mobile app

Unless your making over 600 HP, within .030" is by far close enough... Good on you that you did it though. Just curious, is this on a new bearing?

GT

[renegade]

.029 to .032  on impeller shoulder. No same bearing.

Sent from my SCH-I535 using SoCal Jet Boats mobile app

[HardLuck Baker]

. Yeah, long story. I will have some 396 heads for sale.
Picked up heads from the machine shop, so now I'm ready to get it back together. Summer is coming quick!


RoB~SoCalJetBoats~
[/quote

thats alot of head 

RoB~SoCalJetBoats~

[daniel.sykes]

Primed the kachina after blueprinting

Sent from my XT907 using SoCal Jet Boats mobile app

[Chad krieger]

Finley got the timming chain and gaskets. Motor will be in by next weekend.


Sent from my iPhone using SoCalJetBoats mobile app

[who yo daddy]

Got the Carburetors all dialed in fixs couple of oil leaks pull a motor set the driveline in be set to go🚤💨


Sent from my iPhone using SoCalJetBoats mobile app

[Chad krieger]

Are u ready for some test yet bro. Mine next week.


Sent from my iPhone using SoCalJetBoats mobile app

[MorePower]

wet sanded and polished gonna wash and wax today... This weekends gonna be a long one getting everything tied up and back together


Sent with my Fingers