[jamiemwedmore1234]

May not be a boat. But equally as important got the rust dealt with and all new hard wear so I can get the boat mobile


Sent from my iPad using SoCalJetBoats

[brchris]

Jyeager hard at work making a new bulk head for the southwind sleeper

Sent from my LG-LS980 using SoCal Jet Boats mobile app

[brchris]

Jyeager

Sent from my LG-LS980 using SoCal Jet Boats mobile app

[brchris]

Jyeahger putting in his tallent to help our fellow jet boaters

[pipes]

Time for some new carpet

Sent from my SPH-L720 using SoCal Jet Boats mobile app

[Squirrel Master]

how hard was it to get the carpet out any secrets???

[pipes]

Best tool ever. Took about 2 hours

Sent from my SPH-L720 using SoCal Jet Boats mobile app

[randog]

Best tool ever. Took about 2 hours

Sent from my SPH-L720 using SoCal Jet Boats mobile app

Did you use the scraper or the one with teeth


Sent from my iPhone using SoCalJetBoats

[pipes]

Used the one with the teeth . It actually worked better sliding the tool sideways

Sent from my SPH-L720 using SoCal Jet Boats mobile app

[pipes]

I should mention that most of the carpet came right out and I only had to remove the old adhesive and some carpet backing

Sent from my SPH-L720 using SoCal Jet Boats mobile app

[tpltrbl303]

Bought it a friend

Sent from my DROID RAZR HD using SoCal Jet Boats mobile app

[76NORDIC]

Got this cleaned and painted more to come

Sent from my DROID RAZR using SoCal JetBoats mobile app

[MorePower]

My arms hurt from waxing but definitely stoked on the outcome


Sent with my Fingers

[berkbryan]

My arms hurt from waxing but definitely stoked on the outcome


Sent with my Fingers

What hull is that it looks just like mine

Sent from my SGH-T999 using SoCalJetBoats mobile app

[MorePower]

What hull is that it looks just like mine

Sent from my SGH-T999 using SoCalJetBoats mobile app

18 Southwind

[Havasukona455]

My arms hurt from waxing but definitely stoked on the outcome


Sent with my Fingers

That boat next to it makes your boat look like a toy lol


Sent from my iPhone using SoCal Jet Boats

[Horizonjet]

Out with the old, in with the new

[RedSnapperSlapper]

Rolled out the Hallett today installed the new starter and she fired first crank not bad for sitting for a year. Then built a new engine cover


Sent from my iPhone using SoCalJetBoats mobile app

[MorePower]

That boat next to it makes your boat look like a toy lol


Sent from my iPhone using SoCal Jet Boats

Lol, if you could see it in person you would laugh... It's what everyone says when they come over.

[Bunger]

Did some polishin' on the trailer wheels gettin her all spruced up for parker


Sent from my iPhone using SoCalJetBoats

[keithwidney]

Bunger nice rims and tires what is your setup?

[Bunger]

15" centerlines with some offbrand low pro tires. Trailer came with the tires im gunna need new ones soon these are starting to split and crack.

[Flusher]

I bought this LSM valve spring compressor to pull apart my cylinder heads.  Works great!  Very smooth, stable, and controllable; It is easy to work with and much more rigid than I had expected, even with heavier Vasco roller springs.  I only bought the stud-mount base adaptor, but adaptors are available for just about every engine/rocker combination.  Money well spent if you intend to pull a lot of valve springs.

[Roadrunner]

I bought 4 new rims and tires today. I went up in size from 205/75/14 to 205/75/15. The trailer drags it's ass on every driveway. I wanted a little taller tire to get off the ground. I paid $345 for all 4 tires mounted on rims. I also changed my oil. On Saturday, my wife and I drive up to JetBoatPerformance and drop it off. We are getting a new Dominator style energizer pump with a hydraulic pd. we are very excited to hit the water this year!
My old rims will be up for grabs if anyone needs them. I also have the hubcaps. The tires aren't bad either. Lug pattern is 5x4.5.


Sent from my iPhone using SoCalJetBoats

[tamsone6]

Spent the whole afternoon tearing apart my pump. It was extremely frustrating... First the nut on the impeller would not come off no matter what I tried, heat, wd, 1" impact wrench, wrench with a 5' cheater bar... Finally cut it off with the die grinder. Then my impeller wouldn't come off and my puller kept slipping off messing up the little ridge there. Ended up cutting that off too since it got trashed when my bearing went out. Anyways as it is now I'm in the market for a suction housing and impeller.


Life is uncertain. Don't sip.