so sunday cleaned up the tanks i bought, still need some work.
Then pulled out 99% of the wiring. found burnt up ones and bare wires and ones tucked away after the last rebuild.
then pulled the fuel line from the bow tank and removed the electronic fuel pump. question is should use the pump when running dual tanks? the block i bought has a mechanical pump should i stay with that?
also took a look at the bilge pump, is this a decent brand? should i step up the GPH?
IMO, I would stick with a mechanical pump, less to wire, and less chance of failure, the electric will work just fine, just make sure you mount it as low as possible, and run a relay, also a Rule (red, white and blue pump) bilge pump is the better one, but as long as it works i wouldn't worry about it.
