What did you do to your boat today?

« **Reply #2300 on:** June 19, 2015, 12:52:20 AM »

Finally bolted down my seats. Ended up using inserts. Still sit high. Temporary till next season when I get a good deal on fiberglass buckets

« **Reply #2301 on:** June 19, 2015, 01:23:49 AM »

are you local, dat1dsm?

to orange county, ca. that is....

« **Reply #2302 on:** June 19, 2015, 04:31:01 AM »

Yes I believe so the moisture in the valve covers must have come from the rain and the overheating was a broken AN fitting between the pump / transom plate. Will see you guys on the 4th. Thx Andrew

« **Reply #2303 on:** June 19, 2015, 10:46:21 AM »

Broke in motor last weekend. Time to put the pedal down and see what happens this weekend in Burley!

« **Reply #2304 on:** June 19, 2015, 12:34:45 PM »

Quote from: JARVIS on June 19, 2015, 01:23:49 AM

are you local, dat1dsm?

to orange county, ca. that is....

No. I live in Bakersfield.
Kern county. Why?

« **Reply #2305 on:** June 19, 2015, 01:56:23 PM »

Finished the fence that goes around it and anchored the cover down. She may not run or even have an engine in her but DAMN IT she has a really cool outdoor garage/storage area.

« **Reply #2306 on:** June 19, 2015, 06:11:16 PM »

Quote from: dat1dsm on June 19, 2015, 12:34:45 PM

No. I live in Bakersfield.
Kern county. Why?

pm sent

« **Reply #2307 on:** June 21, 2015, 02:02:39 PM »

Oil change and some fitting swaps on the buddies banshee

Sent from my iPhone using SoCal Jet Boats

« **Reply #2308 on:** June 21, 2015, 02:29:52 PM »

Shot some gel this morning. Just about ready to flip this thing back over.

Sent from my iPhone using SoCal Jet Boats

« **Reply #2309 on:** June 21, 2015, 05:17:57 PM »

Tossed some tunes In haha she ain't much but it works

Sent from my iPhone using SoCal Jet Boats

« **Reply #2310 on:** June 21, 2015, 07:24:35 PM »

Put longer pillow blocks on the cav plate cross bar.. tryin to get a better push on the plate while i wait for parts to get back from the shop...hopefully ill have it back together by the end of the week..

Sent from my MB860 using SoCal Jet Boats mobile app

« **Reply #2311 on:** June 22, 2015, 08:53:32 AM »

Quote from: aquaholic72 on June 21, 2015, 07:24:35 PM

Put longer pillow blocks on the cav plate cross bar.. tryin to get a better push on the plate while i wait for parts to get back from the shop...hopefully ill have it back together by the end of the week..

Sent from my MB860 using SoCal Jet Boats mobile app

Looks good man, is it almost done ?

Sent from my iPhone using SoCal Jet Boats

« **Reply #2312 on:** June 22, 2015, 10:50:45 AM »

Gettin there... prop shaft is done. Im dropping props off today to be checked out, struts out being massaged alil should have it back in a day or two..

Sent from my MB860 using SoCal Jet Boats mobile app

« **Reply #2313 on:** June 22, 2015, 05:37:59 PM »

Quote from: aquaholic72 on June 22, 2015, 10:50:45 AM

Gettin there... prop shaft is done. Im dropping props off today to be checked out, struts out being massaged alil should have it back in a day or two..

Sent from my MB860 using SoCal Jet Boats mobile app

Bitchen, it sucks having a boat that doesn't go, trust me I know, my 034 engine is going to start going back together this weekend

Sent from my iPhone using SoCal Jet Boats

« **Reply #2314 on:** June 22, 2015, 05:38:07 PM »

Quote from: aquaholic72 on June 22, 2015, 10:50:45 AM

Gettin there... prop shaft is done. Im dropping props off today to be checked out, struts out being massaged alil should have it back in a day or two..

Sent from my MB860 using SoCal Jet Boats mobile app

That's for responded to my text yesterday .....

« **Reply #2315 on:** June 22, 2015, 08:56:43 PM »

Pretty much done with fab..... getting to be time pull it down for finish machining.

« **Reply #2316 on:** June 22, 2015, 09:05:36 PM »

dropped the new motor in today

« **Reply #2317 on:** June 23, 2015, 07:36:23 AM »

Well I traded the family boat for a bit more in my direction lol 21ft cougar let me know what you guys think ! Ignore the giant black thing on the back hahah

Sent from my iPhone using SoCal Jet Boats

« **Reply #2318 on:** June 23, 2015, 03:43:31 PM »

Replaced the vacuum secondary 780cfm 3310 with a mechanical secondary 800 cfm Holley Marine D/P
Replaced the 3346 wix fuel filter
Cut the carpet where the old smaller tanks sat.
Note to self 29 series Battery holder is hard to find easy to order but a 27 series might have been the way to go
AND I rubbed my Relief and thought of GT Jets...

« **Reply #2319 on:** June 23, 2015, 08:50:51 PM »

Started to get everything bolted to the new power plant. Just a few things to add and she will be ready to fire!

« **Reply #2320 on:** June 23, 2015, 09:44:45 PM »

I stared at mine for a while and thought what I could do to it if I wasn't so broke!

Sent from my iPhone using SoCal Jet Boats

« **Reply #2321 on:** June 23, 2015, 10:35:33 PM »

Took my motor out to change oil pan gasket

Sent from my iPhone using SoCal Jet Boats

« **Reply #2322 on:** June 24, 2015, 06:59:57 AM »

Gel coated the engine bay

Sent from my iPhone using SoCal Jet Boats

« **Reply #2323 on:** June 24, 2015, 11:17:26 AM »

Waiting on the block and head to get out of machine shop. So I started sanding and prepping for paibt

« **Reply #2324 on:** June 24, 2015, 01:11:07 PM »

Painted the trailer today. Gettin ready for Saturday to take it out.

Sent from my iPhone using SoCal Jet Boats

dat1dsm

JARVIS

RiverRat474

CJ 417

dat1dsm

FordLover

JARVIS

B.CR33CH

HaulsBalls

nordic_scandia

aquaholic72

K-034

aquaholic72

K-034

Racesbc4life

roost

93_ultra

cjlabato

jet fever

93_ultra

coors909

BIGRY116

rhay916

dewest

codyhale