[Squirrel Master]

Motor won't be in balance with two new rods will it?

Sent from my SPH-L900 using SoCal Jet Boats mobile app

[JOE COASTIE]

Motor won't be in balance with two new rods will it?

Sent from my SPH-L900 using SoCal Jet Boats mobile app

theyre used ones hopefully that makes a differanca

Sent from my PantechP9070 using SoCal Jet Boats mobile app

[Flusher]

theyre used ones hopefully that makes a differanca

Are your old rods totally trashed to where you couldn't get weights off of them?  They will probably be pretty close, but could also be way off.   I would at least see if the piston/rod assembly, in the event of pressed pins, were close.  Could pick up a cheap digital postal scale.  Just a suggestion.

Cheers,

Joe

[JOE COASTIE]

Are your old rods totally trashed to where you couldn't get weights off of them?  They will probably be pretty close, but could also be way off.   I would at least see if the piston/rod assembly, in the event of pressed pins, were close.  Could pick up a cheap digital postal scale.  Just a suggestion.

Cheers,

Joe

well i gave them both to lj speed shop in napa to get some that will work soooo hopefully they did all..i gave them my old 2 so they could match them up...hopefully they thought about all that..i cuz i sure as hell didnt..  thanks for info ..next time i kno wat to do...im already half way done now.  Keep u guys posted.

Sent from my PantechP9070 using SoCal Jet Boats mobile app

[SleekcraftJosh]

Getting angry at a jacuzzi tore up the bearing at the river [attachimg=1] and cant get the imp off

[SleekcraftJosh]

Getting angry at a jacuzzi tore up the bearing at the river [attachimg=1] and cant get the imp off

[JARVIS]

Went to mead and got beat in a race with Al (stock 454my ass), 🙈 nice meeting everuone

Sent from my SPH-L900 using SoCal Jet Boats mobile app

how low was the water level?
would you know if you can see the batch mixing plant from hemingway launch?

[JBASHAM]

Pulled her in the garage today. Gotta lift the motor to change the oil and get her prepped for Laughlin next weekend! 

Pretty excited, I'm a river virgin! Wish me luck!!


Sent from my iPhone using SoCalJetBoats

[Flusher]

Pulled her in the garage today. Gotta lift the motor to change the oil and get her prepped for Laughlin next weekend!

While you got it lifted, consider installing an oil drain hose and if necessary, a head-mounted remote oil filter, or at least one that has the filter opening up so it doesn't spill when you remove it.

Be safe and have fun.

Cheers,

Joe

[JBASHAM]

While you got it lifted, consider installing an oil drain hose and if necessary, a head-mounted remote oil filter, or at least one that has the filter opening up so it doesn't spill when you remove it.

Be safe and have fun.

Cheers,

Joe

Thanks Joe! Yeah thats the plan, I have a drain hose on order so hopefully it gets here in time.... If not I plan on pulling the motor in a few months for a dyno session anyway so ill put the hose on then.

[nacho]

Installed the seats in my apache project ...... 


Sent from my iPod touch using SoCal Jet Boats

[jimpen]

Put my headers back on after Embed did a great job on them.

Sent from my XT1080 using SoCal Jet Boats mobile app

[WhyNot76]

Put my headers back on after Embed did a great job on them.

Sent from my XT1080 using SoCal Jet Boats mobile app

    Looks killer man, love that look👍👍


Sent from my iPhone using SoCal Jet Boats

[jimpen]

Thanks I had your headers done at Embee in May of this year.  The boat had all the chrome so we went with chromex coating.  They look nice but you still have to clean them with mothers.  Will you be going to big bend next month for the socal meet.  My wife liked that boat a lot.

[WhyNot76]

Thanks I had your headers done at Embee in May of this year.  The boat had all the chrome so we went with chromex coating.  They look nice but you still have to clean them with mothers.  Will you be going to big bend next month for the socal meet.  My wife liked that boat a lot.

  I'm hoping to be out there, we're goin this weekend for the sw regatta then planning a trip to Parker for October, hopefully I can squeeze big bend in too.I'm thinking about having mine redone this winter, there's a lil rust showin in a few spots and they were cut shorter after the coating so the tips at the ends are rusting a bit. There's quite a few changes I'll be making but for the rest of this season I'm happy with it👍


Sent from my iPhone using SoCal Jet Boats

[jimpen]

I didn't know they got cut.  If you can make it the will be a big group from socal  it will be a good time. 

Sent from my XT1080 using SoCal Jet Boats mobile app

[jimpen]

Maybe a pic or two will help.

Sent from my XT1080 using SoCal Jet Boats mobile app

[WhyNot76]

Maybe a pic or two will help.

Sent from my XT1080 using SoCal Jet Boats mobile app

  I'm pretty sure lupo cut em, they look good but the cutter took some of the coating.


Sent from my iPhone using SoCal Jet Boats

[jimpen]

Yeah he must of cut them.  Embee does a good job for 270.00 for SoCal members

[WhyNot76]

Bitchin, that's where I'll take em👍 thanks


Sent from my iPhone using SoCal Jet Boats

[capogniracing]

Finally got everything switched over from ford to chevy in the cp. long 2 weeks but she's ready to roll. Thanks jim, justin, Omar, Troy, and embee, for your help, can't wait for Sunday!


Sent from my iPhone using SoCal Jet Boats

[Just Electric]

No problem have fun and be safe with it 👍🍻


Sent from my dirty butthole

[capogniracing]

No problem have fun and be safe with it 👍🍻


Sent from my dirty butthole

🍻will do


Sent from my iPhone using SoCal Jet Boats

[jimpen]

Nice work son

Sent from my XT1080 using SoCal Jet Boats mobile app

[WhyNot76]

if you're not gonna use the panther cover you should chop off those 2 brackets from the pump and grind it smooth... just another thing dragging in the water.  mine were chopped off of my pump in my old tahiti.

   Definitely will be doin that, I've been eyeballin them and my grinder since I brought the boat home lol👍


Sent from my iPhone using SoCal Jet Boats